HI friends ,
i have a table containing duplicate data, i want to delete duplicate data.
for ex:
table :
C1 C2 C3
a b c
d e f
h i j
a b c
h i j
here i want to write a job that will delete row no. 4 and 5.
Please help!
Thanks
Manish
Hi All
i there any way in journal creation, like i create the journal and cancel it (not delete) next time when i create the journal get the same number instead of getting one incremented.
thanks
We are potentially implementing NAV this year and will be requiring landed cost functionality, does anybody use this now, does it even exists?? Our current system, uses misc costs and various provision accounts however the transaction process is fairly manual and involved, we will be looking to automate this somewhat, any advice??
Hi all,
I've create ssrs report in VS2008 on my DEV env and all works fine,
when I moved it to my customer env and run from the AX I'm getting this error :
"Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
any ideas??
thanks in advance,
Haim S
Hi All
I'm looking for some advice on cascading project forecasts down from a parent project to multiple layers of sub-projects. Our WBS structures can be quite complex so we want to avoid manual data entry at every level. I'm not currently aware of any transfer feature on our version of AX (2012 CU4).
Any thoughts or guidance most welcome.
Many Thanks
Emily
Are there any UK users of AX 2012 who would be prepared to share the way they use AX 2012 for the goods receipting/cancelling purchase order processes please? We experience several issues with these processes and wondered if any other users do also.
I would like to create a new Routing page similar to the one that comes with NAV 2013 out of the box, only with the following change;
Underneath the Lines list, I want to have a Routing Line Comments list which shows the comments for the selected routing line. It would be great if I could use this to edit the routing comments too.
How do I do this. I tried, but it did not link to the currently selected routing line.
Is there a way to do this?
Thanks
Dave K
HI everyone,
Can someone please send me study material for Trade and Logistics in 2009 or 2012 . Or if someone can send me the link where i can download them from .
Your help will be really appreciated.
Many Thanks,
I've create ssrs report in VS2008 on my DEV env and all works fine,
when I moved it to my customer env and run from the AX I'm getting this error :
"Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
Please help me on this issue.
Thanks in advance
Nagaraj
Hi,
I'm having an issue after installing hotfix 2816385. The hotfix is a kernel update, it doesn't affect any AOT object. However, when trying to compile we now receive an error in object VendPaymSched. There's a method in there which tries to access a map that no longer exists. This map is "CustVendPaymentSched". The map is present in another still working AX environment (where we didn't yet installed the hotfix).
After further investigating we noticed that the object CustVendPaymentSched is now present as a table in the non-compiling environment. So somehow, the hotfix, or something else, has changed the CustVendPaymentSched map into a CustVendPaymentSched table. The table has all the same properties as the map in the good environment (Label, ConfigrationKey, LegacyId,...). These objects are all on the sys layer so I can't remove it.
I have already logged this issue with Microsoft but as this is very blocking I decided to give it a shot here. Does anyone have a clue how this could have happened and how I can fix this?
Thanks in advance!
Hi All,
I done the integration of weighment with Ax 2009. But, when using the breakpoint on the form only, i can receive the data, without using the breakpoint, i can't receive the value. It shows empty.
The code is as listed.
_Port.Open();
for (i=1;i<=80000;i++)
{
}
// breakpoint;
While(strlen(ntstring)<=5)
{
ntstring = _Port.ReadExisting();
}
_Port.Close();
Hi All,
I am getting this error message when i try to update the purchase order line.
"An update conflict occurred due to another user process deleting the record or changing one or more fields in the record."
I tried reread, RecVersion method. But not working.
Please help me to solve this issue.
Once i got this error, It is coming continuously.
Thanks in advance,
Hari
Hello,
I tried to install the AX 2012 Demo from a partner website on a local Win 7 Pro computer following the advice from the following link changing a computer name in regedit:
https://community.dynamics.com/ax/f/33/t/112901.aspx
but still getting a one error regarding a Web site (SharePoint Central Administration) prerequisite as below (it's an only one error remains from 40 prerequisits validations):
"Web site (Microsoft SharePoint Central Administration):
The SharePoint Central Administration web site must be running
Ensure that a supported version of SharePoint is installed and the Central Administration web site is running.
If a supported version of SharePoint is installed, verify that the Central Administration web site has been configured by clicking Start > All Programs > Microsoft SharePoint Products > SharePoint Central Administration. Follow the instructions in the configuration wizard to configure the web site."
I did install the SharePoint Foundation 2010 on the same local computer following the link below:
http://msdn.microsoft.com/en-us/library/ee554869(office.14).aspx
I can run Central Administration from the All Programs-> SharePoint 2010 Products and from the IIS Manager opening it in a browser.
So, I'm not sure what else could be done to satisfy the prerequisit requirement.
Please, advise what could be done to go through with the AX Demo installation.
Thanks
Hello All,
I have a very weird requirement to be accomplished.
I have a Web Form Developed in for EP and in that form i have several fields in it.
Now are there any possible ways to override the modified events for any of such controls ?
Means i want some values in the next fields to be changed on the input of the fields which is possible in AX Forms.
How can i carry on with this task ?
We upgraded from GP10 to GP2013 about 6mo ago. I installed the Year End update around 1/1/14. We run payroll weekly and every week since the update we've had the same recurring problem: the check is cut for more than the actual calculated net pay for some employees. The following are also associated with this issue:
1) The check cannot be voided (says check does not exist)
2) The check posting batch is out of balance by the amount the employee was overpaid (account affected is the Cash account bc it's paying them more than the liabilities and expenses)
3) Sometimes the Federal and/Or State Taxes are not calculated at all but other standard deductions are
4) The Recreate Check Stub feature will display correct amount but shows where the direct deposit was for the wrong amount.
5) All checks affected so far have garnishments (either court-order and/or notes/loans from our company). We use PIP for our garnishments not greenshades. It does not affect everyone with a garnishment.
6) Some of the affected employees would have netted zero & been in arrears, but not all. It only adds money to their pay never takes it.
Microsoft's suggestion to our partner was to re-sequence the deductions to: TSA deductions, Standard, then Garnishments which we tried and less people were affected but it still occurred. This is creating major issues with net wages and taxes, not too mention paying people extra, non-traceable amounts. Having it affect a handful of people a week is burdensome for us. Through testing, I think I've ruled out an issue with minimun net pay and maximum garnishment rules. The amount they're overpaid is not consistant either, I can't narrow down how it gets the number but it does vary by the deduction sequence when testing.
If anyone has any ideas, I would appreciate it. We're not getting a lot of assistance from Microsoft, they believe it's just a sequencing problem which it is however, why it's consistantly happening every week since the YE update seems questionable.
Thank you.
Hi All,
I need to call PurchEditLines form for picking list and get some lines from some purchases like pushing select button at PurchEditLines form. I couldn't found anything about this.
I just found create picking list from purchase code...
Microsoft Dynamics GP
When customers are set up as National Accounts, is there any way to apply the credit from one child account to an invoice on another child account?
Should we close the inventory first or post the counting journal, Which should be done first?
Hi,
I want Delete Duplicate Records In table level i am using this DeleteDuplicate()...
its working...is there any another way to delete duplicate records...
static void DeleteDuplicate(Args _args)
{
Set fieldset = new set(types::Integer);
DictIndex dictIndex = new dictIndex (tablenum(PurchTable), indexnum(PurchTable,PurchIdx));
;
fieldset.add(fieldnum(PurchTable ,OrderAccount));
ReleaseUpdateDB::indexAllowDup(dictIndex);
ReleaseUpdateDB::deleteDuplicatesUsingIds(tablenum(PurchTable),0,fieldset);
ReleaseUpdateDB::indexAllowDup(dictIndex);
info("Deletion done");
}
Thanks,
SureSh
I would like to change the length of the Comment field of table 99000775 (Routing Comment Line).
Certain lines are required to be unbroken (not split to new lines).
Is this OK to do, or is it likely to cause problems later on?